CanServo/ID1/en
Jump to navigation
Jump to search
It is an ID that identifies the servo.
- Register Address: 0x32
- The range of values depends on the CanServo/MODE/CAN/en setting.
- CAN 2.0A, 2.0B: 1 to 255
- This value works as CanServo/ID/Servo/en
- UAVCAN: 1 to 127
- This value works as CanServo/ID/Actuator/en
- CAN 2.0A, 2.0B: 1 to 255
- Refer to CanServo/Packet Accept Rule/en for the packet reception procedure in CAN 2.0A, 2.0B.
Communication settings including this setting are applied at the time of servo reset.
When changing, SAVE and Servo Reset are required.