CanServo/Register/en
Jump to navigation
Jump to search
Various setting values required for CAN servo operation, such as target position, maximum speed, and maximum torque, are stored in 128 registers. For example, Register CanServo/POSITION_NEW/en is the target position of the servo. If you write a new value to this register, the servo moves to that position. If the CAN packet according to the Control Protocol below is sent, the servo executes Write / Read Command accordingly to control the servo.
- CanServo/Register/Write/en - Write Register
- CanServo/Register/Read/en - Read Register
- CanServo/Protocol/Control/en - Write or Read Message Format