Difference between revisions of "Interface/DPC-20/eng"
Jump to navigation
Jump to search
(Created page with "DPC-20 * HW Type = PC USB-C to 3pin(PWM/TTL) and 4pin(485/CAN) interface * You can set up and test HiTek digital servos. * Depending on the control method (PWM, 485, CAN), it...") |
|||
| Line 1: | Line 1: | ||
DPC-20 | DPC-20 | ||
* HW Type = PC USB-C to 3pin(PWM/TTL) and 4pin(485/CAN) interface | * HW Type = PC USB-C to 3pin(PWM/TTL) and 4pin(485/CAN) interface | ||
* You can set up and test | * You can set up and test HiTEC digital servos. | ||
* Depending on the control method (PWM, 485, CAN), it can be used instead of the existing DPC-11, DPC-485, and DPC-CAN. | * Depending on the control method (PWM, 485, CAN), it can be used instead of the existing DPC-11, DPC-485, and DPC-CAN. | ||
* Since the communication content and method are different depending on the type of servo, a separate UI is used. | * Since the communication content and method are different depending on the type of servo, a separate UI is used. | ||
Revision as of 02:30, 30 May 2024
DPC-20
- HW Type = PC USB-C to 3pin(PWM/TTL) and 4pin(485/CAN) interface
- You can set up and test HiTEC digital servos.
- Depending on the control method (PWM, 485, CAN), it can be used instead of the existing DPC-11, DPC-485, and DPC-CAN.
- Since the communication content and method are different depending on the type of servo, a separate UI is used.
| Servo Series | UI | UI Link | Compatible interface |
| 5/7 series | DPC-11 PC UI (3.1.0+) | DPC-11 PC UI | DPC-11 |
| 9 series | DPC-11 PC UI (3.1.0+) | DPC-11 PC UI | DPC-11 |
| D series | DPC-11 PC UI (3.1.0+) | DPC-11 PC UI | DPC-11 |
| D-485 series | DPC-11 PC UI (3.1.0+) | DPC-11 PC UI | DPC-485 |
| CAN series | CAN AIO(All in One) UI (2023_06_14+) | AIO UI | DPC-CAN |
- NOTE - DPC-485
- For cases other than the D-485 series, a separate dedicated UI may be used.
- At this time, if you use DPC-20 instead, connect it to USB and open the COM port after about 20 seconds to use it as before.