Difference between revisions of "UI/CAN/AIO/eng"

Latest revision as of 00:13, 25 July 2024

AIO (All In One) UI
- You can configure HiTEC CAN servo, simple operation test, and FW update.
- It can be used by connecting multiple servos simultaneously.
  - However, if there is a servo with FW Ver < 1.7 and before ID setting, only one servo must be connected individually.

Version	History	Exe	Interface	Manual
2024_04_03	Motor Direction - FW Ver 2.1+ DroneCAN : TURN_MULTIPLIER : 1.6(3) <= FW Ver < 1.7 or FW Ver >= 2.1	(ZIP) 2024_04_03_01	DPC-CAN, DPC-20	PDF

NOTE
- Requires Microsoft DotNet Framework 4
- DPC-20 - First supported on 2023_06_14, latest version recommended

@@ Line 3: / Line 3: @@
 ** You can configure HiTEC CAN servo, simple operation test, and FW update.
 ** It can be used by connecting multiple servos simultaneously.
-*** However, if there is a servo with FW Ver 1.7 or lower and before ID setting, only one servo must be connected individually.
+*** However, if there is a servo with FW Ver < 1.7 and before ID setting, only one servo must be connected individually.
 * History
@@ Line 12: / Line 12: @@
    <td>Exe</td>
    <td>Interface</td>
+  <td>Manual</td>
 </tr>
 <tr>
    <td>2024_04_03</td>
    <td>Motor Direction - FW Ver 2.1+<br>
-TURN_MULTIPLIER - FW Ver 1.6(3) or higher / lower than 1.7, FW Ver 2.1 or higher
+DroneCAN : TURN_MULTIPLIER : 1.6(3) <= FW Ver < 1.7 or FW Ver >= 2.1
 </td>
    <td>[http://support.hitecrcd.net:7700/files/UI/CAN-AIO/CAN-AIO-UI-2024_04_03_01.zip (ZIP) 2024_04_03_01]</td>
    <td>DPC-CAN, DPC-20</td>
+  <td>[http://support.hitecrcd.net:7700/files/UI-manual/HITEC-CAN-AIO-UI-240610_EN.pdf PDF]</td>
 </tr>
 </table>
@@ Line 27: / Line 29: @@
 ** DPC-20 - First supported on 2023_06_14, latest version recommended
-* [[UI/downloads | UI - all downloads]]
+* Link - [[UI/downloads | all UI downloads]]