Difference between revisions of "CanServo/Protocol/V1.1"

From HITEC_HELP
Jump to navigation Jump to search
(6 intermediate revisions by the same user not shown)
Line 2: Line 2:


* This protocol needs FW Ver 1.12+
* This protocol needs FW Ver 1.12+
* The purpose of this message is to set the servo's ID based on the servo's UID.


* CAN ID
* CAN ID
Line 11: Line 9:
* Message : Servo -> Host
* Message : Servo -> Host
** ZUID, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>, <CAN Mode : 1 byte>
** ZUID, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>, <CAN Mode : 1 byte>
** 이 메시지는 서보 설정 ID1, ID2 중에 하나라도 0 이면 서보가 주기적으로 발신합니다.


* Message: Host -> Servo
* Message: Host -> Servo
Line 16: Line 15:
** ZIDS, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>
** ZIDS, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>
** ZIDS, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>, <CAN Mode : 1 byte>
** ZIDS, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>, <CAN Mode : 1 byte>
** UID 가 일치하는 서보는, 메시지의 길이에 따라, ID2, ID1, CAN Mode 까지 설정합니다.


* This message is delivered using the MultiPacket method below.
* This message is delivered using the MultiPacket method below.

Revision as of 01:57, 26 July 2024

CAN Protocol Ver 1.1

  • This protocol needs FW Ver 1.12+
  • CAN ID
    • 0x7FF : Servo -> Host
    • 0x7FE : Host -> Servo
  • Message : Servo -> Host
    • ZUID, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>, <CAN Mode : 1 byte>
    • 이 메시지는 서보 설정 ID1, ID2 중에 하나라도 0 이면 서보가 주기적으로 발신합니다.
  • Message: Host -> Servo
    • ZIDS, <UID : 16 byte>, <ID2 : 4 byte>
    • ZIDS, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>
    • ZIDS, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>, <CAN Mode : 1 byte>
    • UID 가 일치하는 서보는, 메시지의 길이에 따라, ID2, ID1, CAN Mode 까지 설정합니다.
  • This message is delivered using the MultiPacket method below.

MultiPacket for Long Message

CanServo/Protocol/MultiPacketsforLongMessage