Difference between revisions of "CanServo/FW Files/en"

From HITEC_HELP
Jump to navigation Jump to search
Tag: Manual revert
Line 12: Line 12:


* Param File:
* Param File:
** MD65MG - [http://support.hitecrcd.net:7700/files/Param/MD65MG-CAN-2021_09_06_01.csv MD65MG-CAN-2021_09_06_01.csv]
** MD70MH - [http://support.hitecrcd.net:7700/files/Param/MD70MH-CAN-2021_09_06_01.csv MD70MH-CAN-2021_09_06_01.csv]
** MD89MW - [http://support.hitecrcd.net:7700/files/Param/MD89MW-CAN-2021_09_09_01.csv MD89MW-CAN-2021_09_09_01.csv]
** MD145SW - [http://support.hitecrcd.net:7700/files/Param/MD145SW-CAN-2021_09_06_01.csv MD145SW-CAN-2021_09_06_01.csv]
** MD145SW - [http://support.hitecrcd.net:7700/files/Param/MD145SW-CAN-2021_09_06_01.csv MD145SW-CAN-2021_09_06_01.csv]
** MD245MW - [http://support.hitecrcd.net:7700/files/Param/MD245MW-CAN-2021_09_06_01.csv MD245MW-CAN-2021_09_06_01.csv]
** MD250MW - [http://support.hitecrcd.net:7700/files/Param/MD250MW-CAN-2021_09_06_01.csv MD250MW-CAN-2021_09_06_01.csv]
** Changed
** Changed
*** Default Travel Range: +/- 60 deg
*** Default Travel Range: +/- 60 deg

Revision as of 05:48, 18 October 2021

FW Files

  • These files for manual update only.

Ver 1.5(2)

MD

SG33

  • Param File:
    • Torque Type - PARAM_SG33CAN_2021_09_07_01.csv
      • Changed
        • Default Travel Range: +/- 60 deg
          • Reg 176 : 16300 -> 10922
          • Reg 178 : 91 -> 5462
        • PID Values changed for Ver 1.5(2)
          • Reg 138 : 3700 -> 3700
          • Reg 140 : 50 -> 0
          • Reg 142 : 0 -> 0
          • Reg 144 : 0 -> 550
Retrieved from "http://support.hitecrcd.net:7700/index.php?title=CanServo/FW_Files/en&oldid=565"