Difference between revisions of "DPC-20/ENG/0"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
<tr> | <tr> | ||
<td>3.1.4</td> | <td>3.1.4</td> | ||
<td> | <td>Added servo recongnition (ex: MDB1200)</td> | ||
<td>[http://support.hitecrcd.net:7700/files/UI/dpc-11/install_DPC-11_2023_05_11_01-3.1.4.exe Installer(EXE) V3.1.4]</td> | <td>[http://support.hitecrcd.net:7700/files/UI/dpc-11/install_DPC-11_2023_05_11_01-3.1.4.exe Installer(EXE) V3.1.4]</td> | ||
</tr> | </tr> | ||
Revision as of 05:54, 17 August 2023
DPC-20
- DPC-20 is an integrated interface device to solve the inconvenience of separately purchasing various interface devices (DPC-11, DPC-485, DPC-CAN) according to the control method (PWM, 485, CAN).
- For each interface type, the latest version of the existing UI supports DPC-20.
- DPC-11 UI - Ver 3.1.0 or higher
| Version | History | FILE |
| 3.1.4 | Added servo recongnition (ex: MDB1200) | Installer(EXE) V3.1.4 |
| 3.1.2 |
Limit Window : Added DB9xx (dsPIC) OHP over heat protection setting
|
Installer(EXE) V3.1.2 |
| 3.1.1 | Limit Window 추가 : Voltage Min/Max | Installer(EXE) V3.1.1 |
- DPC-485 UI
- When DPC-20 is newly connected, a new COM port is created like DPC-485.
- When DPC-20 is newly connected to the PC, after pressing Close serial on the UI and waiting for about 20 seconds, select the COM port of DPC-20, press Open Serial and use as usual.
- DPC-CAN UI
- Requires Microsoft DotNet Framework 4
| UI Type | Minimum | Version | History | FILE |
| CAN servo APP Update |
2022_09_14 or later (Latest version recommended) |
2022_09_14 | DPC-20 correspondence | (ZIP) 2022_09_14_01 |
| CAN servo Config & Test |
2022_08_31 or later (Latest version recommended) |
2023_04_11 | SR series correspondence | (ZIP) 2023_04_11_01 |
| 2023_01_30 | FW Ver 2.0 correspondence | (ZIP) 2023_01_30_01 | ||
| 2022_12_07 | Min/Max Voltage: Modify Description: Remove [V], ex) Add 700 = 7.00V Position Min/Mid/Max range change: -16384 to +16384 |
(ZIP) 2022_12_07_01 | ||
| 2022_08_31 | DPC-20 correspondence | (ZIP) 2022_08_31_01 | ||
| CAN servo AIO(all in one) |
2023_06_14 or later (Latest version recommended) |
2023_07_21 | Motor Direction - FW Ver 2.1 or higher TURN_MULTIPLIER - FW Ver 1.6(3) or higher / 1.7 or higher, FW Ver 2.1 or higher |
(ZIP) 2023_07_21_01 |