Difference between revisions of "CanServo/Stream/Address/en"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
Through 4 registers, you can designate a total of 8 addresses, 2 addresses per register. | Through 4 registers, you can designate a total of 8 addresses, 2 addresses per register. | ||
* Address 1 = 0xE2 | * Address 1,2 = Reg 0xE2 | ||
* Address | * Address 3,4 = Reg 0xE4 | ||
* Address | * Address 5,6 = Reg 0xE6 | ||
* Address | * Address 7,8 = Reg 0xE8 | ||
Note: This function only works with [[CanServo/MODE/CAN]] = CAN 2.0A, 2.0B. | Note: This function only works with [[CanServo/MODE/CAN]] = CAN 2.0A, 2.0B. | ||
Revision as of 00:04, 6 September 2023
Instead of the data that the Stream function transmits by default, you can directly specify the addresses of 8 data you want. Through 4 registers, you can designate a total of 8 addresses, 2 addresses per register.
- Address 1,2 = Reg 0xE2
- Address 3,4 = Reg 0xE4
- Address 5,6 = Reg 0xE6
- Address 7,8 = Reg 0xE8
Note: This function only works with CanServo/MODE/CAN = CAN 2.0A, 2.0B.