Difference between revisions of "CanServo/DroneCAN/ParamService/List/en"
Jump to navigation
Jump to search
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
* FW Ver 1.9 | * FW Ver 1.9 (2022_03_02) | ||
** Tested on UAVCAN GUI Tool Ver 0.9 | ** Tested on UAVCAN GUI Tool Ver 0.9 | ||
| Line 222: | Line 222: | ||
| 1 | | 1 | ||
| 0 | | 0 | ||
| 0=FREE, 1=BRAKE | |||
| BLDC Only | |||
|- | |||
| ENABLE_2PHASE_BRAKE | |||
| 0 | |||
| 1 | |||
| 0 | |||
| 0=FULL BRAKE, 1=HALF BRAKE | |||
| BLDC Only | | BLDC Only | ||
|- | |- | ||
| Line 233: | Line 241: | ||
| 65535 | | 65535 | ||
| 0 | | 0 | ||
|- | |- | ||
| PRODUCT_NO | | PRODUCT_NO | ||
| Line 282: | Line 283: | ||
need current circuit | need current circuit | ||
|- | |- | ||
| | | ENABLE_PEAK_POWER_RATE | ||
| 0 | | 0 | ||
| 1 | | 1 | ||
Latest revision as of 07:11, 26 April 2022
- FW Ver 1.9 (2022_03_02)
- Tested on UAVCAN GUI Tool Ver 0.9
| Name | Min | Max | Default | Comment | Version or Condition |
|---|---|---|---|---|---|
| ServoID | 0 | 127 | 0 | ||
| NodeID | 0 | 127 | 0 | ||
| CAN_BAUDRATE | 0 | 8 | 0 |
0=1000 kbps | |
| UNITNESS_RADIAN_MODE | 0 | 1 | 0 |
0=UNITLESS | |
| STREAM_TIME(ms) | 0 | 65535 | 0 | ||
| STREAM_MODE | 0 | 1 | 0 |
0=OFF | |
| DEADBAND | 0 | 65535 | 4 |
Position error range to Turn off Motor | |
| INERTIA | 0 | 4095 | 1 |
0=off | |
| VOLTAGE_MAX(10mV) | 0 | 65535 | 0 | 0 = off | |
| VOLTAGE_MIN(10mV) | 0 | 65535 | 0 | 0 = off | |
| TEMPER_MAX('C) | 0 | 65535 | 0 | 0 = off | |
| TEMPER_MIN('C) | 0 | 65535 | 0 | 0 = off | |
| ECHO | 0 | 65535 | 0 | reset to 0 | |
| USER1 | 0 | 65535 | 0 | User Value | |
| USER2 | 0 | 65535 | 0 | User Value | |
| SPEED_MAX | 0 | 32767 | depends on the product | ||
| TORQUE_MAX | 0 | 4095 | 4095 |
0=0% | |
| OLP_TIME(sec) | 0 | 65535 | 3 | Over Load Protection: Time | |
| OLP_RATE(%) | 0 | 100 | 100 | Over Load Protection: Rate | |
| TIME_UP(ms) | 0 | 65535 | 0 | Time Speed Up: 0% to 100% | |
| TIME_DN(ms) | 0 | 65535 | 0 | Time Speed Down: 100% to 0% | |
| TIME_ES(ms) | 0 | 65535 | 0 | Time Speed Down in Emegency Stop: 100% to 0% | |
| SPEED_VOLTAGE(100mV) | 0 | 65535 | depends on the product | Voltage that is the reference for actual speed | |
| POSITION_MID | 0 | 16383 | 8192 | ||
| POSITION_MIN_LIMIT | 0 | 16383 | 5462 | -60 deg | |
| POSITION_MAX_LIMIT | 0 | 16383 | 10922 | +60 deg | |
| EMG_POS_MAX | 0 | 16383 | 0 | ||
| EMG_POS_MIN | 0 | 16383 | 0 | ||
| ENABLE_START_POSITION | 0 | 1 | 0 | ||
| START_POSITION | 0 | 16383 | |||
| ENABLE_FAILSAFE_POSITION | 0 | 1 | 0 | ||
| FAILSAFE_POSTION | 0 | 16383 | 0 | ||
| FAILSAFE_TIME(msec) | 0 | 65535 | 0 | ||
| ENABLE BRAKE_INSTEAD_FREE(BLDC) | 0 | 1 | 0 | 0=FREE, 1=BRAKE | BLDC Only |
| ENABLE_2PHASE_BRAKE | 0 | 1 | 0 | 0=FULL BRAKE, 1=HALF BRAKE | BLDC Only |
| ENABLE_OVERVOLT_BRAKE | 0 | 1 | 0 | ||
| BRAKE_VOLT(10mV) | 0 | 65535 | 0 | ||
| PRODUCT_NO | 0 | 65535 | depends on the product | ||
| APP VERSION | YYYYMMDDRRV1V2V3
2022030201030900 | ||||
| PARAM VERSION | YYYYMMDDRR
2022030201 | ||||
| ZERO_SETUP | system, don't care | ||||
| NodeID(ID2H) | don't care | ||||
| SPEC_POWER | 0 | - | depends on the product | 0.01W, 1000 = 10.00W |
need current circuit |
| ENABLE_PEAK_POWER_RATE | 0 | 1 | 0 |
need current circuit | |
| PEAK_POWER_RATE | 0 | 2000 | 0 | %% |
need current circuit |