Difference between revisions of "CanServo/FW/Update/Connected/en"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
Condition: | Condition: | ||
* Update target servo must has B3 bootloader. | * Update target servo must has B3 bootloader. | ||
* Update target servo has FW Ver 1.4+ | |||
* Update target servo must be capable of receiving individual packets. | * Update target servo must be capable of receiving individual packets. | ||
** CAN protocol - [[CanServo/ID2/en]], [[CanServo/ID1/en]] | ** CAN protocol - [[CanServo/ID2/en]], [[CanServo/ID1/en]] | ||
Revision as of 03:27, 18 September 2021
Condition:
- Update target servo must has B3 bootloader.
- Update target servo has FW Ver 1.4+
- Update target servo must be capable of receiving individual packets.
- CAN protocol - CanServo/ID2/en, CanServo/ID1/en
- UAVCAN protocol - CanServo/ID/Actuator/en
- Example Servo List: 3 Servos:
- Servo 1: ID2 = 1, ID1 = 100
- Servo 2: ID2 = 1, ID1 = 101
- Servo 3: ID2 = 1, ID1 = 102
Update Steps:
- Send CanServo/Bootloader/Switch/en packets to the servo you want to update.
- [[CanServo/Protocol/Bootloader/en]
- Check in Bootloader
- Send FW Image
- Get FW Status
- Go FW ( Quit from Bootloader )
- Check in FW running.