Difference between revisions of "CanServo/Protocol/V1.1"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
== CAN Protocol Ver 1.1 == | == CAN Protocol Ver 1.1 == | ||
Revision as of 03:06, 3 July 2024
CAN Protocol Ver 1.1
- This protocol needs FW Ver 1.12+
- The purpose of this message is to set the servo's ID based on the servo's UID.
- CAN ID
- 0x7FF : Servo -> Host
- 0x7FE : Host -> Servo
- Message : Servo -> Host
- ZUID, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>, <CAN Mode : 1 byte>
- Message: Host -> Servo
- ZIDS, <UID : 16 byte>, <ID2 : 4 byte>
- ZIDS, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>
- ZIDS, <UID : 16 byte>, <ID2 : 4 byte>, <ID1 : 1 byte>, <CAN Mode : 1 byte>
- This message is delivered using the MultiPacket method below.