Difference between revisions of "CanServo/Protocol/V1.2"
Jump to navigation
Jump to search
| Line 47: | Line 47: | ||
|- | |- | ||
| 2 | | 2 | ||
| ADDR LO | | ADDR 0 LO | ||
| | | | ||
|- | |- | ||
| 3 | | 3 | ||
| bit 1:0 | | bit 1:0 | ||
| ADDR HI | | ADDR 0 HI | ||
|- | |- | ||
| 3 | | 3 | ||
| bit 7:2 | | bit 7:2 | ||
| ADDR | | ADDR 1 add = 64 = +1~+64 | ||
|- | |- | ||
| 4 | | 4 | ||
Revision as of 06:53, 9 September 2024
Write Command
| POS | NAME | COMMENT |
|---|---|---|
| 0 | 'p' | Write 2 byte |
| 1 | TARGET SERVO ID | |
| 2 | ADDR LO | |
| 3 | ADDR HI | |
| 4 | DATA BYTE 0 (Low) | |
| 5 | DATA BYTE 1 (High) |
| POS | NAME | COMMENT |
|---|---|---|
| 0 | 'P' | Write 2 byte |
| 1 | TARGET SERVO ID | |
| 2 | ADDR 0 LO | |
| 3 | bit 1:0 | ADDR 0 HI |
| 3 | bit 7:2 | ADDR 1 add = 64 = +1~+64 |
| 4 | DATA 0 BYTE 0 (Low) | |
| 5 | DATA 0 BYTE 1 (High) | |
| 6 | DATA 1 BYTE 0 (Low) | |
| 7 | DATA 1 BYTE 1 (High) |
- NOTE ! NO RETURN PACKET
Read Command
| POS | NAME | COMMENT |
|---|---|---|
| 0 | 'g' | Read 2 byte |
| 1 | TARGET SERVO ID | |
| 2 | ADDR LO | |
| 3 | ADDR HI |
Write and Read Command
- Use 'o' instead of 'p' on Write Command
Return Packet
| POS | NAME | COMMENT |
|---|---|---|
| 0 | 'y' | Return 2 byte |
| 1 | SERVO ID | |
| 2 | ADDR LO | |
| 3 | ADDR HI | |
| 4 | DATA BYTE 0 (Low) | |
| 5 | DATA BYTE 1 (High) |