CanServo/Save/en

From HITEC_HELP

Revision as of 02:11, 6 September 2023 by Choiyh (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

To save servo registers, write 0xFFFF to register 0x70.

Recommanded Procedure:
- Stop Motor
- Write 0xFFFF to Reg 0x70
- Wait 1 sec
- Reset or Power Off/On
- Check Params and Working

Retrieved from "http://support.hitecrcd.net:7700/index.php?title=CanServo/Save/en&oldid=900"