CanServo/Protocol/LongMessage

From HITEC_HELP
Revision as of 08:41, 29 May 2025 by Choiyh (talk | contribs)
Jump to navigation Jump to search

Long Message

  • 각 패킷마다 Tail Byte가 있어서, 1개 혹은 여러개의 패킷으로 보낼 수 있는 방식입니다.
  • This content refers to the message format of UAVCAN.
    • Thanks to UAVCAN
  • Note:
    • CRC16 : byte order : low byte first, little endian

CAN 2.0

  • Packaging the message to be sent.
    • If the message to be sent is 8 bytes or more, CRC16 is added.
  • Packet's Data Format
    • < Data : max 7 byte, cut from packed Message >, <Check Byte>
    • Check Byte
      • bit 7 = first packet
      • bit 6 = last packet
      • bit 5 = Toggle, first packet = 1, toggle bit on each packet
      • bit 4:0 = Seq, 0 ~ 31, inc 1 on each message
  • Messages less than 8 bytes long are transmitted as one packet.
  • CRC starting value is 0xFFFF (-1)

CAN-FD

  • CAN-FD는 data가 64바이트까지 확장됩니다.
    • 0~8, 12, 16, 20, 24, 32, 48, 64
  • Packaging the message to be sent.
    • If the message to be sent is 63 bytes or more, CRC16 is added.
    • 메시지의 길이가 62바이트 이하이면, crc16을 붙이지 않고, single packet으로 전송
  • packet data format: data에 crc16이 포함되어 있을 수 있습니다.
    • data len <= 7: <data: max 7 bytes>, <tail byte>
    • 8바이트를 초과하는 경우에는 첫 바이트에 전송 데이터 길이를 지정합니다.
    • data len >= 8, len <= 62: , <data: n byte>, <tail byte>
  • Under construction !