CanServo/ID1/en
Revision as of 16:09, 23 September 2021 by Choiyh (talk | contribs) (Created page with "It is an ID that identifies the servo. * Register Address: 0x32 * The range of values depends on the CanServo/MODE/CAN setting. ** CAN 2.0A, 2.0B: 1 to 255 *** This...")
It is an ID that identifies the servo.
- Register Address: 0x32
- The range of values depends on the CanServo/MODE/CAN setting.
- CAN 2.0A, 2.0B: 1 to 255
- This value works as CanServo/ID/Servo
- UAVCAN: 1 to 127
- This value works as CanServo/ID/Actuator
- CAN 2.0A, 2.0B: 1 to 255
- Refer to CanServo/Packet Accept Rule for the packet reception procedure in CAN 2.0A, 2.0B.