CanServo/Stream/Address/en

From HITEC_HELP
Revision as of 00:04, 6 September 2023 by Choiyh (talk | contribs)
Jump to navigation Jump to search

Instead of the data that the Stream function transmits by default, you can directly specify the addresses of 8 data you want. Through 4 registers, you can designate a total of 8 addresses, 2 addresses per register.

  • Address 1,2 = Reg 0xE2
  • Address 3,4 = Reg 0xE4
  • Address 5,6 = Reg 0xE6
  • Address 7,8 = Reg 0xE8

Note: This function only works with CanServo/MODE/CAN = CAN 2.0A, 2.0B.

Retrieved from "http://support.hitecrcd.net:7700/index.php?title=CanServo/Stream/Address/en&oldid=898"